M100/1 - PROFESSIONAL DPF CLEANER - pack of 1 tank
M100 FAP / DPF CLEANER is a product formulated to solve problems of cleaning and clogging of FAP / DPF filters of combustion vehicles.
The FAP / DPF CLEANER is preferably used pure and can possibly be diluted with cold or lukewarm water, as per the data reported below, depending on the thickness and degree of deposits to be removed. M100 Product / water ratio: 9 parts of product + 1 part of water. Once the solution has been prepared, pour it into the filter, previously disassembled and appropriately closed on the gas return tubes, until it is completely filled. Wait 1 hour for normal cleaning, up to a few hours for heavy and particularly difficult situations. (If the filter is in critical conditions, take care to pour the product until it is full, and top up it as it works, penetrating and releasing parts of the clogged filter). Repeat the operation from both filter openings (gas inlet side + gas outlet side). Once the action is complete, proceed with rinsing, preferably with pressurized water.
It happens that for short / urban journeys the FAP system does not always reach the ideal temperature values to start the combustion process, the M100 serves to optimize the cleaning cycle and remove the accumulation of deposits inside the FAP / DPF that in the long run would require costly extraordinary maintenance interventions.
M100 is a water-based alkaline mixture, with excellent sequestering power, slightly viscous for the best adhesion on surfaces.
It is NOT flammable.
DOES NOT damage metal and ceramic parts
Consult the safety information sheet on the website www.gipro.it
Since the DPF / FAP Cleaner is an alkaline water-based mixture, it can be disposed of as a detergent, according to the regulations in force.
M100 / 1 is delivered in packs of 1 tank of 5 liters.